What is the tyre size of Royal Enfield Interceptor 650?

Yes it is perfectly possible. You can source same excel rims(nearly 25k) or buy aluminium alloy rims from alibaba. will cost you nearly 10k. But then you need to buy spokes, hub, bearings and set them up with the help of an exert. in total a 4.25x17 inch rear rim alone will cost you nearly 22k when you get it ready to install.

Yes it is perfectly possible. You can source same excel rims(nearly 25k) or buy aluminium alloy rims from alibaba. will cost you nearly 10k. But then you need to buy spokes, hub, bearings and set them up with the help of an exert. in total a 4.25x17 inch rear rim alone will cost you nearly 22k when you get it ready to install.

Interceptor 650 used to get Pirelli Phantom tyres. However, the brand hasn't shared any word officially for replacing the tyre brand. It could be the government's step to support the domestic tyre manufacturer Just like KTM 390 Adventure's Metzeler Tourance have been replaced by MRF Meteor M tyeres.

Import of tyres have become very expensive and hence they have switched over to ceat. Ceat and Bridgestone manufacture these tyres in soft compound for int.

I have clocked 5500 km in my INT 650. It is a Pirelli tubeless tyre because it is spokes rim company has provide tube in it . If you upgrade to alloy just we can fit the tyre. Tyre quality is fair . My assumption is maximum 20,000 km tyre life. That too in good driving conditions without off roading activities. 4 years warranty is there so don't worry about parts company will take care.

Mine clocked 20999 kms today and still going strong. Middle marking on tyre fades out but sides grains are still showing 70% presence. Its pure riding skills. I do off-roads, on-roads, highways , leaning etc. but never loose confidence because of the soft compound of tyres. I will do another 2k-3k kms on same stock tyres and go for next set.

Same issue, but mine started from day 1, at first I thought the valves might need some getting used to kinda situation. But after 2 days, when the engine was driven for about 5-10mins and when the engine heat start to build up the sound became louder. I have had few ceased my yamaha FZ-S a couple of times to know when the sound of the engine is not right. tik tik sound in the values in such a performance bike is not acceptable. Imagine riding the bike at top speed, in highways obviously, and suddenly the valves act up. Once my fz's timing change broke loose from its socket as it was not screwed in properly and this was at 80kmph. What if same thing happens?Same response from the service center, this is normal sound, they are checking for sound difference using some instrument to measure decibels.I've never had satisfactory service for my fz, my cars and now 650 twin. I can accept yamaha or skoda as I only approched the authorized service center never expected such no skill or knowledge service from RE directly.

Please warm up the engine 3-5 minutes before moving.The noise may be coming from the valves not getting the proper lubrication.The noise should come down to normal level after warm up.If it still does produce that noise take to service center for a valve clearance recheck.Hope this helps! Happy riding!

I left my GT 650 to the RE service station for this issue only, they kept the bike there for 10 days..checked wiring, cleaned, refitted each and every relay, connectors and what not. They did not find any fault in the RR unit. Today when took the bike after 10 long days..the same problem still persists. Wrote complaint to RE support team. Don’t know what happens next and how this life threatening issue will be rectified!!

My Abs light has been staying on constantly after riding for a while. Seems like it's triggered by the heat. It would not come on during the winter months. But now that summer is here I have noticed the light come on and stay on, meaning there is abs fault, when I brake hard the abs is not activated, and rear wheel locks up. When I let the bike rest, cool down, the light goes off and abs works like normal.

Yes , it does have slipper clutch. More easy to down shift gears while riding.

Is there any automatic clutch for intwrseptar?

I checked with RE team below is there reply:"We are currently in the middle of cast alloy development for twins and nearing completion of our extensive durability & validation testing. All being well we expect products available in the new year around Feb 21."