Q. Can I install rear headrest in Brezza lxi?

Dear Fellow Brezzarians, I have good news for you. You can confidently go for Brezza LXI if your budget does not permit higher models and fix rear head rests for below Rs.3000/- This is the step by step guide for you all.Step1. buy rear head rests 2 nos from Boodmo.com part number 86401M65M20-DM8 each @ Rs.475/- +delivery charges= Rs.1080/-Step2.buy head rest sleeves. part reference is .GUIDE COMP,HEADRESTRAINT 2 nos (85840M79M20-5PK) and.GUIDE,HEADRESTRAINT 2 nos (85341M79M10-5PK). total 80/-. you may have to buy min Rs.100/- and delivery charges 50. total 150/-Step3, take out rear seat frame and ask your local welder to weld 2 pipes at the exact placement of head rests cost would be Rs.1000/- for the total of taking out frame, welding and putting the frame back into rear seat. put the sleeves and make headrests sit on them. your job is done.noshowroom is capable of giving you solution for this. I found it myself. not cumbersome. no need to sweat or feel bad. Alternatively, you can also buy frame with those pipes directly from boodmo for Rs.2500/-+delivery. But i got them welded and no problem at all.

Dear Fellow Brezzarians, I have good news for you. You can confidently go for Brezza LXI if your budget does not permit higher models and fix rear head rests for below Rs.3000/- This is the step by step guide for you all.Step1. buy rear head rests 2 nos from Boodmo.com part number 86401M65M20-DM8 each @ Rs.475/- +delivery charges= Rs.1080/-Step2.buy head rest sleeves. part reference is .GUIDE COMP,HEADRESTRAINT 2 nos (85840M79M20-5PK) and.GUIDE,HEADRESTRAINT 2 nos (85341M79M10-5PK). total 80/-. you may have to buy min Rs.100/- and delivery charges 50. total 150/-Step3, take out rear seat frame and ask your local welder to weld 2 pipes at the exact placement of head rests cost would be Rs.1000/- for the total of taking out frame, welding and putting the frame back into rear seat. put the sleeves and make headrests sit on them. your job is done.noshowroom is capable of giving you solution for this. I found it myself. not cumbersome. no need to sweat or feel bad. Alternatively, you can also buy frame with those pipes directly from boodmo for Rs.2500/-+delivery. But i got them welded and no problem at all.

Thanks Raghav for the information. I ordered the same products that you have mentioned and gave it to a seat cover making shop for removing the seat cover. Then I bought a ¾ inch square pipe and gave the frame to a welding shop, they welded it and gave back to the cover shop and they reassembled it. We had to remove the cover again because the headrest guide was not fitting properly. Then after some adjustments it worked. Thanks alot for the information. Really appreciate it. Because I've been searching in many shops for doing this. Most of them told that you have to change the whole seat, only some told that you can weld it, but they didn't have the parts and also didn't know from where to get it and it's specs.