I'm getting issues in my Pulsar NS200 as it stops after 4-5 km and restart in next 5-10 min only to repeat the entire thing again. I have got my fuel tank and Carburettor cleaned, still the problem is persisting. Radiator fan is working too but to no benefit. So what could be the problem?

Question

Priyesh · Accepted Answer

I was facing the same issue.. i even changed the carburettor but still the same issue.. then figured out that that the fuel filter was clogged due toh kachra from fuel tank.. I would suggest you guys to change the fuel filter every year.. it hardly costs around 100-150rs.. and then the carburettor was getting the fuel in right proportion and the bike didn't gave issues after that. FUEL FILTER PLAYS AN IMPORTANT ROLE PROVIDING FUEL FROM TANK TO THE CARBURETTOR...

Siddharth · Answer

You get the BS4 pipe checked that runs from beneath the fuel tank. Its has folded due to faulty settings previously by the mechanics while they opened your bike. Tell the mechanic to place it properly and also tell him to check whether there is a fold in the BS4 pipe or not.

Vishal · Answer

Did u recently service your bike. If yes, then go back and ask the mechanic to check the petrol tank. It happens with me once the same thing. The problem was they close the petrol pipe so much that fuel wasn't passing properly. Check may b its problem

Madhurjya · Answer

Hi All,Any solution to the problem? I am facing the same issue. Showed it to the mechanic, he said radiator was clogged and he cleaned it but still the problem persists.

Rathina · Answer

Please check the breather tube from tank top to fuel filter. If it is stuck under the tank too tight your bike will run ten minutes and will switch off. Then you will have to wait another 15 minutes for the bike to switch on

Anonymous · Answer

Coolant flow might not be proper as engine stalling occurs due to overheating get the pipes amd coolant pump checked

Nelson · Answer

I would suggest to first check the battery, if the battery is getting enough charge from the stator magneto coil to run the vehicle.

Lalit · Answer

I have same issu frends pls suggest something

Nasaru · Answer

The problem is tank top breather tube cut or damage

Rigzin · Answer

Same problem....plz suggest something

Pahal · Answer

Check your CDI...under the back seat

Abinesh · Answer

I also have same problem please give me a suggestion

Rambi · Answer

I am facing this problem currently, despite changing radiator, spark plugs. In showroom, They don't completely check, I understood. Today they wanted to test ride my bike, as they are unsure of the problem.

Rigzin · Answer

Same problem

Zohaib · Answer

There could be a fault in cdi unit which is under the back seat of 200ns. It is cuboid in shape.

Kuldeep · Answer

Yes. I had done it on my Enticer.

Rajesh · Answer

I was facing the same issue. Then I will change petrol filter the problem is gone.

Nilesh · Answer

My ns 200 also open mechanic then after same issue starting of my bike

Atif · Answer

First of all check your petrol tank air pipe

Garcia · Answer

Clean the petrol tank cap's air vents.

Nilesh · Answer

So they are clear a bike problem

Q. I'm getting issues in my Pulsar NS200 as it stops after 4-5 km and restart in next 5-10 min only to repeat the entire thing again. I have got my fuel tank and Carburettor cleaned, still the problem is persisting. Radiator fan is working too but to no benefit. So what could be the problem?

Bajaj Pulsar NS200 Questions

Topics you might be interested in